POSITIVERECORDS.RU

Бесплатные ACT расширения с сайта ANSYS по состоянию на 1 июня 2022, включая все предыдущие доступные версии.
Для информации: я так и не понял логику сайта ансис, порой он требует авторизацию с Customer ID(для лицензионных клиентов) для скачивания бесплатных расширений, порой это не нужно. На всякий случай и для удобства выкачал все доступные расширения. Если у вас есть возможность, лучше качайте с официального сайта, там будет последняя версия.
Полный список расширений с описаниями в спойлере:

Описание расширений

7t More-PDF V1.1
Supports Ansys: 19, 19.1, 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1, 2020 R2
Target Application: Workflow
Creates 3D-PDF documents directly from within Ansys Mechanical and also standalone for other environments like CFD-PrePost, Electronics Desktop or MAPDL.

7t Trajectory V1
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Draw 3D Trajectories of vertices or nodes in graphic window, draw diagrams of path length, velocity or acceleration and export csv file with result values

AISC/ACI-EuroCodes Check & Design V5
Supports Ansys: 2019 R1, 2019 R2, 2019 R3, 2020 R1, 2020 R2, 2021 R1, 2021 R2
Target Application: Mechanical
This Trial Application allows the user to check and design their ANSYS® Workbench™ models using the American AISC/ACI, European EC2 and EC3 international construction standards for beams and shells, both Steel and Reinforced Concrete, and ACI 349 international construction standards for beams and shells.

ANSYS Motion V2020.2
Supports Ansys: 2020 R2
Target Application: Mechanical
The App exposes ANSYS Motion analyses in Workbench
Mechanical

ANSYS Motion V2020.1
Supports Ansys: 2020 R1
Target Application: Mechanical
The App exposes ANSYS Motion analyses in Workbench Mechanical

ANSYS Motion V2019.3
Supports Ansys: 2019 R3
Target Application: Mechanical
The App exposes ANSYS Motion analyses in Workbench
Mechanical

ANSYS Workbench SwiftComp GUI V1
Supports Ansys: 19, 19.1, 19.2
Target Application: Mechanical
ANSYS Workbench SwiftComp GUI is a plugin to power ANSYS with efficient high-fidelity multiscale, multiphysics modeling for composites. It assures the best models at a given level of efficiency in any scale the user chooses, linking micromechanics and structural analysis.

ANSYS Workbench SwiftComp GUI V1.01
Supports Ansys: 19, 19.1, 19.2
Target Application: Mechanical
ANSYS Workbench SwiftComp GUI is a plugin to power ANSYS with efficient high-fidelity multiscale, multiphysics modeling for composites. It assures the best models at a given level of efficiency in any scale the user chooses, linking micromechanics and structural analysis.

APDL Editor V1.1
Supports Ansys: 18, 18.1
Target Application: Mechanical
Allow for users to have an environment for writing APDL commands that is integrated with live, contextual help. Command argument recognition, command searching, and automatic help page display are all available to help streamline and debug the APDL code while it is being generated.

API 4F Wind Loading V1
Supports Ansys: 18
Target Application: Mechanical
Apply wind loading on solid/shell/beam geometry per API 4F guideline [Contains source code]

API 4F Wind Loading V1
Supports Ansys: 17
Target Application: Mechanical
Apply wind loading on solid/shell/beam geometry per API 4F guideline [Contains source code]

ASME Fatigue V201.4
Supports Ansys: 2020 R1, 2020 R2, 2021 R1
Target Application: Mechanical
Fatigue calculation post-processing tool to plot the cycles to failure and accumulated damage according to section 5.5.3 in ASME VIII Div. 2

ASME Local Failure V201.4
Supports Ansys: 2020 R1, 2020 R2, 2021 R1
Target Application: Mechanical
Local failure calculation post-processing tool to plot the local failure utilization ratio according to section 5.3.3 in ASME VIII, Div. 2, with the possibility to specify forming strain and/or a loading sequence.

ASME Material Generator V201.3
Supports Ansys: 19, 19.1, 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1
Target Application: Workflow
Stress Strain Curve according to Annex 3-D, ASME 2013 VIII Div.2 / KD-231.4 ASME 2015 VIII Div.3

ASME Material Generator V192.2
Supports Ansys: 18, 18.1, 18.2, 19, 19.1, 19.2
Target Application: Workflow
Stress Strain Curve according to Annex 3-D, ASME 2013 VIII Div.2 / KD-231.4 ASME 2015 VIII Div.3

ASME Material Generator V1
Supports Ansys: 18, 18.1
Target Application: Workflow
Stress Strain Curve according to Annex 3-D, ASME 2013 VIII Div.2 / KD-231.4 ASME 2015 VIII Div.3

ASME Material Generator V1
Supports Ansys: 19
Target Application: Workflow
Stress Strain Curve according to Annex 3-D, ASME 2013 VIII Div.2 / KD-231.4 ASME 2015 VIII Div.3

Acoustics V192.1
Supports Ansys: 19.2
Target Application: Mechanical
Expose 3D acoustics solver capabilities to perform acoustic, vibro-acoustic, contained fluid or immersed structure analyses

Acoustics V191.1
Supports Ansys: 19.1
Target Application: Mechanical
Expose 3D acoustics solver capabilities to perform acoustic, vibro-acoustic, contained fluid or immersed structure analyses

Acoustics V7
Supports Ansys: 17.1
Target Application: Mechanical
Expose 3D acoustics solver capabilities to perform acoustic, vibro-acoustic, contained fluid or immersed structure analyses

Acoustics V7
Supports Ansys: 17.2
Target Application: Mechanical
Expose 3D acoustics solver capabilities to perform acoustic, vibro-acoustic, contained fluid or immersed structure analyses

Acoustics V4
Supports Ansys: 17
Target Application: Mechanical
Expose 3D acoustics solver capabilities to perform acoustic, vibro-acoustic, contained fluid or immersed structure analyses

Acoustics V3
Supports Ansys: 18.2
Target Application: Mechanical
Expose 3D acoustics solver capabilities to perform acoustic, vibro-acoustic, contained fluid or immersed structure analyses

Acoustics V2
Supports Ansys: 18
Target Application: Mechanical
Expose 3D acoustics solver capabilities to perform acoustic, vibro-acoustic, contained fluid or immersed structure analyses

Acoustics V1
Supports Ansys: 19
Target Application: Mechanical
Expose 3D acoustics solver capabilities to perform acoustic, vibro-acoustic, contained fluid or immersed structure analyses

Add Images V2
Supports Ansys: 19
Target Application: Mechanical
Automatically add/remove images/figures to the outline tree. Also support the views that are created via the View Manager or use 3d mouse to orient the model before taking the image/figure

Add Images V1
Supports Ansys: 18
Target Application: Mechanical
Automatically add/remove images/figures to the outline tree. During the creation still possible to orient the model before taking the image/figure. Only work in combination with a 3D mouse

Additive Print Transfer V2020.1
Supports Ansys: 2019 R3
Target Application: Mechanical
Extension to improve the workflow of importing results from Additive Print into Workbench for post processing steps

Advanced Enclosure V8
Supports Ansys: 17, 17.1, 17.2
Target Application: DesignModeler
Create fluid enclosure and decompose it to sweepable bodies [Contains source code]

Analysis Settings Importer V3
Supports Ansys: 19
Target Application: Mechanical
Allow to use a .csv file to import analysis settings for time stepping [Contains source code]

Analysis Settings Importer V2
Supports Ansys: 18
Target Application: Mechanical
Allow to use a .csv file to import analysis settings for setting step end times, toggle automatic time stepping and define substeps [Contains source code]

Analysis Settings Importer V1
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Allow to use a .csv file to import analysis settings for setting step end times, toggle automatic time stepping and define substeps [Contains source code]

Ansys Topology Optimization V1
Supports Ansys: 17.2
Target Application: Mechanical
Expose Topology Optimization capabilities in Workbench Mechanical.Optimized model can be exported and edited in SpaceClaim for performing validation study and/or 3D printing

Ansys Topology Optimization V1
Supports Ansys: 17
Target Application: Mechanical
Expose Topology Optimization capabilities in Workbench Mechanical.Optimized model can be exported and edited in SpaceClaim for performing validation study and/or 3D printing

Ansys Topology Optimization V1
Supports Ansys: 17.1
Target Application: Mechanical
Expose Topology Optimization capabilities in Workbench Mechanical.Optimized model can be exported and edited in SpaceClaim for performing validation study and/or 3D printing

App Generator for AIM V1
Supports Ansys: 19.1
Target Application: AIM
The app allows the user to create a guided simulation starting from an AIM project without writing any code

AutoProfile V1
Supports Ansys: 17.2
Target Application: Fluent
Convert .csv file to Fluent profile setting to check time dependent condition graphically in this wizard and set it as Fluent profile

AutoSubmodel V1
Supports Ansys: 18.2, 19, 19.1
Target Application: Mechanical
The Auto Submodel extension is the automation of the procedure in doing submodelling from the full model. No repetitive work needed for cutting full geometry, importing interface, resetting contacts, materials etc., as they are all automated.

Automatic Shape Optimization V3
Supports Ansys: 19, 19.1, 19.2, 2019 R1
Target Application: Fluent
This app automates shape optimization process. You cannot only use multi-objective or multi-condition optimization but new method combining DesignXplorer and Adjoint Solver.

Automatic Shape Optimization V2
Supports Ansys: 19
Target Application: Fluent
This app automates shape optimization process. As well as multi-objective or multi-conditional optimization, you can also use new method, Mixed Optimization Process, that combines DesignXplorer and Adjoint Solver.

Automatic Shape Optimization V1
Supports Ansys: 17.2
Target Application: Fluent
This app automates shape optimization process. As well as multi-objective or multi-conditional optimization, you can also use new method, Mixed Optimization Process, that combines DesignXplorer and Adjoint Solver.

Battery Design Toolkit V2
Supports Ansys: 19, 19.1
Target Application: Systems
Give the users the ability to install and use the ANSYS Battery Design Toolkit in Simplorer

Battery Design Toolkit V1.1
Supports Ansys: 18, 18.1
Target Application: Systems
Give the users the ability to install and use the ANSYS Battery Design Toolkit in Simplorer

Beam End Release V1.4
Supports Ansys: 18
Target Application: Mechanical
Expose the end release feature for beam elements and enable advanced graphic post-processing for beam results

Beam End Release V2
Supports Ansys: 18.2, 19, 19.1, 19.2
Target Application: Mechanical
Expose the end release feature for beam elements and enable advanced graphic post-processing for beam results

Beam End Release V1.3
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Expose the end release feature for beam elements and enable advanced graphic post-processing for beam results

Beam End Release V2
Supports Ansys: 18.2, 19, 19.1, 19.2
Target Application: Mechanical
Expose the end release feature for beam elements and enable advanced graphic post-processing for beam results

Beam End Release V1.4
Supports Ansys: 18
Target Application: Mechanical
Expose the end release feature for beam elements and enable advanced graphic post-processing for beam results

Beam End Release V1.3
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Expose the end release feature for beam elements and enable advanced graphic post-processing for beam results

Beam to Link V4
Supports Ansys: 2019 R1
Target Application: Mechanical
App to convert line bodies defined in Workbench to cables, trusses or compression only elements using link180 elements

Beam to Link V3
Supports Ansys: 17
Target Application: Mechanical
Convert line bodies defined in Workbench to cables, trusses or compression only elements using link180 elements

Better Material V1
Supports Ansys: 17.2
Target Application: Mechanical
Expose mechanical-based material types as parameters inside ANSYS Workbench. Instead of varying independent numeric material properties, analyze the entire material type and leverage DesignXplorer-powered optimization studies to help you choose the best material for your simulation.

Bodies or Instances Converter V2
Supports Ansys: 19
Target Application: SpaceClaim
Simplify repetitive multi-body adjustments by easily defining group and layer instances of similar yet independent solid bodies (e.g., bolts, screws, washers, ...)

Bodies or Instances Converter V1.1
Supports Ansys: 18
Target Application: SpaceClaim
Simplify repetitive multi-body adjustments by easily defining group and layer instances of similar yet independent solid bodies (e.g., bolts, screws, washers, ...)

Bodies or Instances Converter V1
Supports Ansys: 17.1, 17.2
Target Application: SpaceClaim
Simplify repetitive multi-body adjustments by easily defining group and layer instances of similar yet independent solid bodies (e.g., bolts, screws, washers, ...)

Bolt Result V1
Supports Ansys: 2020 R1, 2020 R2, 2021 R1, 2021 R2
Target Application: Mechanical
BoltResult scans all time steps and gives the maximum values of Axial Force, Shear at I & J, Torque, Moment at I & J in a time-dependent or time-independent analysis.

Bolt Toolkit V201.13
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1
Target Application: Mechanical
Pre and Post processing tool to create groups of rivets, bolt pretension, simplified bolts and advanced bolts with thread contact section. Rivet and bolt results can be evaluated according to Eurocode 3 and VDI 2230.

Bolt Toolkit V192.12
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3
Target Application: Mechanical
Pre and Post processing tool to create groups of rivets, bolt pretension, simplified bolts and advanced bolts with thread contact section. Rivet and bolt results can be evaluated according to Eurocode 3 and VDI 2230.

Bolt Toolkit V192.11
Supports Ansys: 19.2
Target Application: Mechanical
Pre and Post processing toolkit to create groups of rivets, bolt pretension, simplified bolts and advanced bolts with thread contact section. Bolt results can be evaluated according to Eurocode 3 and VDI 2230

Bolt Toolkit V191.1
Supports Ansys: 19.1
Target Application: Mechanical
Pre and Post processing toolkit to create groups of rivets, bolt pretension, simplified bolts and advanced bolts with thread contact section. Bolt results can be evaluated according to Eurocode 3 and VDI 2230

Bolt Toolkit V182.1
Supports Ansys: 18, 18.1, 18.2
Target Application: Mechanical
Pre and Post processing toolkit to create groups of rivets, bolt pretension, simplified bolts and advanced bolts with thread contact section. Bolt results can be evaluated according to Eurocode 3 and VDI 2230

CAD Cleanup Tool V3
Supports Ansys: 17, 17.1, 17.2
Target Application: DesignModeler
Streamline the conversion of CAD data to ANSYS Icepak objects using ANSYS DesignModeler. Easy to use GUIs can help you remove unwanted bodies, get rid of holes, and simplify geometry for analysis

CAESES Geometry Engine V3
Supports Ansys: 19, 19.1, 19.2, 2019 R1
Target Application: Mechanical
This app allows you to use CAESES geometry models for shape optimization with ANSYS tools. Meshing and simulation of CAESES models can be completely automated. CAESES focuses on parametric complex shapes. Typical applications: Ship hulls, turbochargers, pumps, turbines, wings, manifolds, volutes, rotor blades and impellers.

CAESES Geometry Engine V2
Supports Ansys: 19, 19.1, 19.2
Target Application: Workflow
Use CAESES geometry models for shape optimization. Meshing and analysis of CAESES models can be automated. CAESES focuses on parametric complex shapes. Typical applications : Ship hulls, turbochargers, pumps, turbines, wings, manifolds, volutes, intake ports, rotor blades

CAESES Geometry Engine V1
Supports Ansys: 19
Target Application: Workflow
Use CAESES geometry models for shape optimization. Meshing and analysis of CAESES models can be automated. CAESES focuses on parametric complex shapes. Typical applications : Ship hulls, turbochargers, pumps, turbines, wings, manifolds, volutes, intake ports, rotor blades

CFX2Fluent V2
Supports Ansys: 19
Target Application: Workflow
Connect CFX Setup with Fluent Setup for extended, automatable CFD analysis within the ANSYS Workbench Project Schematic

CFX2Fluent V1
Supports Ansys: 17
Target Application: Workflow
Connect CFX Setup with Fluent Setup for extended, automatable CFD analysis within the ANSYS Workbench Project Schematic

CFX2Fluent V1
Supports Ansys: 18
Target Application: Workflow
Connect CFX Setup with Fluent Setup for extended, automatable CFD analysis within the ANSYS Workbench Project Schematic

CFturbo V2020.1
Supports Ansys: 19, 19.1, 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1, 2020 R2
Target Application: Workflow
This App enables the integration of the turbomachinery design software CFturbo into the ANSYS Workbench. In addition to a connection to TurboGrid and SpaceClaim, a bi-directional parameter update is possible. Fixed Named selections can be used to create robust workflows.

CFturbo V10.4
Supports Ansys: 19, 19.1, 19.2, 2019 R1
Target Application: Workflow
This App enables the integration of the turbomachinery design software CFturbo into the ANSYS Workbench. In addition to a connection to TurboGrid and SpaceClaim, a bi-directional parameter update is possible.

CFturbo Add-on V1
Supports Ansys: 19.2
Target Application: Workflow
Integrates CFturbo and TurboGrid to provide parametric study of pump impeller in Workbench.

CSV Plot V212.1
Supports Ansys: 2021 R2
Target Application: Mechanical
Post processing tool to create custom nodal or element contour plot from csv file including unit conversion and mid node interpolation.

CSV Plot V211.9
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1, 2020 R2, 2021 R1
Target Application: Mechanical
Post processing tool to create custom nodal or element contour plot from csv file including unit conversion and mid node interpolation

CSV Plot V201.8
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1
Target Application: Mechanical
Post processing tool to create custom nodal or element contour plot from csv file including unit conversion and mid node interpolation

CSV Plot V192.7
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3
Target Application: Mechanical
Post processing tool to create custom nodal or element contour plot from csv file including unit conversion and mid node interpolation

CSV Plot V191.6
Supports Ansys: 19.1
Target Application: Mechanical
Post processing tool to create custom nodal or element contour plot from csv file including unit conversion and mid node interpolation.

CSV Plot V180.5
Supports Ansys: 18, 18.1
Target Application: Mechanical
Post-processing app to create custom contour plot from csv file including unit conversion

CSV Plot V170.3
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Post-processing app to create custom contour plot from csv file including unit conversion

CYBERNET Extensions - Result output control - V1.7
Supports Ansys: 2021 R1, 2021 R2
Target Application: Mechanical
A feature that allows you to limit the output of the result to a specific geometry or load step and reduce the size of the result file.

CYBERNET Toolbox V2022.1
Supports Ansys: 2022 R1
Target Application: Mechanical
CYBERNET Toolbox is a customized tool that makes Ansys Workbench more convenient to use.

CadToPost V3
Supports Ansys: 19, 19.1, 19.2
Target Application: Workflow
Allows Workbench users to easily import CAD into the CFDPost application

CadToPost V1
Supports Ansys: 17.1, 17.2
Target Application: Workflow
Allow Workbench users to easily import CAD into the CFDPost application

CadToPost V1
Supports Ansys: 17
Target Application: Workflow
Allow Workbench users to easily import CAD into the CFDPost application

CadToPost V1
Supports Ansys: 18
Target Application: Workflow
Allow Workbench users to easily import CAD into the CFDPost application

Command Obj to ACT V2
Supports Ansys: 19
Target Application: Mechanical
Easily convert your APDL command objects / snippets into working ACT extensions. Make it easy to create your own custom apps with your own specific APDL code [Contains source code]

Command Obj to ACT V1
Supports Ansys: 18, 18.1, 18.2
Target Application: Mechanical
Easily convert your APDL command objects / snippets into working ACT extensions. Make it easy to create your own custom apps with your own specific APDL code [Contains source code]

Compressive Only Support V1
Supports Ansys: 18.2
Target Application: Mechanical
Apply a contact compressive only support with possibility to change contact settings (keyopts and real constants)

Compressive Support Settings CSS V2
Supports Ansys: 19, 2019 R3
Target Application: Mechanical
A powerful tool that provides an alternative to Ansys WB’s built-in compressive support boundary condition. The functionality of Ansys Classic has been transferred to the WB environment so that the user can control all compressive support parameters in a user-friendly way. This is the second version of the extension where the user can choose between two different types of contact elements. The user can choose between CONTA174 and CONTA178 and a full spectrum of advanced settings such as: Contact algorithm, Detection method, Stiffness and many others. Thanks to this extension, advanved analyses using compressive support can be performed without the need to create additional macros, directly from Ansys WB menu. This tool has two contact support definitions: based on 174 element and based on 178 element. User has to decide which option is better in his/her model. Act app has much more options then compression only support in Ansys Workbench.

Convection V21.1
Supports Ansys: 2021 R1
Target Application: Mechanical
Expose convection with pilot node capability in steady-state and transient thermal analyses.
-
Convection V2
Supports Ansys: 17, 17.1
Target Application: Mechanical
Expose convection with pilot node capability in steady-state and transient thermal analyses
-
Convection V2
Supports Ansys: 17.2
Target Application: Mechanical
Expose convection with pilot node capability in steady-state and transient thermal analyses
-
Convection V1
Supports Ansys: 19
Target Application: Mechanical
Expose convection with pilot node capability in steady-state and transient thermal analyses
-
Convection V1
Supports Ansys: 18
Target Application: Mechanical
Expose convection with pilot node capability in steady-state and transient thermal analyses
-
Convection Links V1
Supports Ansys: 19
Target Application: Mechanical
Allow thermal exchange between nodal surfaces via convective links
-
Convert To Point Mass V1
Supports Ansys: 18, 18.1, 18.2
Target Application: Mechanical
One click to convert solid components into point mass with automatic calculations and assignments of total mass, center of gravity location, and moment of inertia [Contains source code]
-
Coupled Diffusion V1
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Introduce coupled diffusion analysis (structural diffusion, thermal diffusion, and structural thermal diffusion) in both static and full transient analysis
-
Coupled Field Physics V1.2
Supports Ansys: 18
Target Application: Mechanical
Expose piezoelectric, thermal-piezoelectric and thermal-structural solver capabilities
-
Coupled Field Physics V1
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Expose piezoelectric, thermal-piezoelectric and thermal-structural solver capabilities
-
Custom Update V3
Supports Ansys: 19
Target Application: Workflow
Facilitate to automatically export various data during the �Update� process for a Component/System/Project and Design Point
-
Custom Update V2.5
Supports Ansys: 18
Target Application: Workflow
Facilitate to automatically export various data during the �Update� process for a Component/System/Project and Design Point
-
Custom Update V2.4
Supports Ansys: 17, 17.1, 17.2
Target Application: Workflow
Facilitate to automatically export various data during the �Update� process for a Component/System/Project and Design Point
-
DOE from Correlation V1
Supports Ansys: 18, 18.1
Target Application: DesignXplorer
Use parameters correlation results to create the DOE for a Response Surface Optimization and automatically deactivate minor parameters with the ability to reuse Design Point values
-
DOE from Correlation V1
Supports Ansys: 17, 17.1
Target Application: DesignXplorer
Use parameters correlation results to create the DOE for a Response Surface Optimization and automatically deactivate minor parameters with the ability to reuse Design Point values
-
Density Scaling V201.4
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1, 2020 R2
Target Application: Mechanical
Scale the density of selected bodies at the environment level by a factor, average density or total mass
-
Density Scaling V201.3
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1
Target Application: Mechanical
Scale the density of selected bodies at the environment level by a factor, average density or total mass
-
Density Scaling V1
Supports Ansys: 18
Target Application: Mechanical
Scale the mass density of selected bodies at the environment level. Allow a local scaling of the densities of one or more bodies at the setup level, such that all other information may be shared between the two analyses
-
DesignModeler Utilities V3.41
Supports Ansys: 18, 18.1, 18.2, 19, 19.1, 19.2
Target Application: DesignModeler
Exposes some useful utilities of DesignModeler
-
DesignModeler Utilities V3.4
Supports Ansys: 17
Target Application: DesignModeler
Expose some useful utilities of DesignModeler
-
DesignXplorer Utilities V1.2
Supports Ansys: 19, 19.1, 19.2, 2019 R1
Target Application: DesignXplorer
Additional Design of Experiments types: Full Factorial, LHS with Parameter Relationships (+ ability to match allowed values). Provide some useful utilities: Import Parameters and DOE, Correlation to DOE, RSO to Direct Optimization, Import Parameter Bounds, Export Parameter Bounds, Define Parameter Bounds by Percentage, Remove Failed DOE Points.
-
DesignXplorer Utilities V1.1
Supports Ansys: 19, 19.1, 19.2
Target Application: DesignXplorer
Additional Design of Experiments types: Full Factorial, LHS with Parameter Relationships (+ ability to match allowed values). Provide some useful utilities: Import Parameters and DOE, Correlation to DOE, RSO to Direct Optimization, Import Parameter Bounds, Export Parameter Bounds, Define Parameter Bounds by Percentage, Remove Failed DOE Points.
-
DesignXplorer Utilities V1
Supports Ansys: 18.2
Target Application: DesignXplorer
Additional Design of Experiments types: Full Factorial, LHS with Parameter Relationships (+ ability to match allowed values). Provide some useful utilities: Import Parameters and DOE, Correlation to DOE, RSO to Direct Optimization, Import Parameter Bounds, Export Parameter Bounds, Define Parameter Bounds by Percentage, Remove Failed DOE Points.
-
Direct Optimization from RSO V1
Supports Ansys: 18, 18.1
Target Application: DesignXplorer
Create a new Direct Optimization system based on the Response Surface Optimization definition and results
-
Direct Optimization from RSO V1
Supports Ansys: 17, 17.1
Target Application: DesignXplorer
Create a new Direct Optimization system based on the Response Surface Optimization definition and results
и другие...